Trikdis

E16 is not just an Ethernet transmitter that sends messages to compatible security systems. It also transmits the command received over the internet to the system to arm/disarm protection mode.

Sends events to monitoring station receiver:

• Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
• Can send event messages to SIA DC-09 receivers.
• Connection supervision by polling to IP receiver every 30 seconds (or by user-defined period).
• The backup channel, that will be used if connection with the primary channel is lost.
• With parallel communication channels events can be sent to two receivers at the same time.
• When Protegus service is enabled, events are first delivered to CMS, and only then are sent to app users.

Works with Protegus app:

• “Push” and special sound notifications informing about events.
• Remote system Arm/Disarm.

Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).

• Remote temperature monitoring (with iO or iO-WL expanders).
• Different user rights for administrator and installer.

Notifies users:

• Users can be notified about events with Protegus app.

Controllable outputs and inputs:

• 3 double I/O terminals that can be set either as input (IN) or controllable output (OUT) terminals.
• Outputs controlled by the Protegus app.
• Add additional inputs and controllable outputs with wired and wireless iO expanders.

Quick setup:

• Settings can be saved to file and quickly written to other communicators.
• Two access levels for configuring the device for CMS administrator and for the installer.
• Remote configuration and firmware updates.

SENDS EVENTS TO MONITORING STATION RECEIVER:
• Sends events to TRIKDIS software or hardware receivers that work with any monitoring software.
• Can send event messages to SIA DC-09 receivers.
• Connection supervision by polling to IP receiver every 10 seconds (or by user defined period).
• Backup channel, that will be used if connection with the primary channel is lost.
• When Protegus service is enabled, events are first
delivered to CMS, and only then are sent to app users.

WORKS WITH PROTEGUS APP:
• “Push” and special sound notifications informing about events.
• Remote system Arm/Disarm.
• Remote control of connected devices (lights, gates, ventilation systems, heating, sprinklers, etc.).
• Different user rights for administrator, installer and user.

CONTROLLABLE OUTPUTS AND INPUTS:
• 2 input, selectable type: NC, NO, EOL=2.2 kΩ
• 1 output controlled via:
• Mobile/Web application

QUICK SETUP:
• Settings can be saved to file and quickly written to other communicators.
• Two access levels for configuring the device for CMS administrator and for installer.
• Remote configuration and firmware updates.